Toronto Buffing Inc.
Toronto Buffing Inc.
More than detailing; specializing in in-depth restoration, repair, and protection of auto paint surfaces. From tested ceramic coatings, to delicate paint protection film installations, Toronto Buffing has you covered.
We are often regarded by our peers as one of the most skilled paint correction, restoration, and protection services in Toronto. Through our now discontinued hands on training program, we are the educators and mentors of several thriving automotive detailing businesses in Ontario. Our "standard" paint correction and ceramic coating jobs organically win awards, such as Cobble Beach Concours, Porsche Centre Concours, Importfest, etc. Our work has been featured in magazines such as The Speed Hunters. We have earned our reputation due to our extremely high standards, thorough knowledge in both the science and limitations of automotive paint, tens of thousands of hours hands on experience, stringent quality control, and unparalleled work ethic. Well over a decade of consistent, documented quality paint correction, ceramic coating, and PPF executions are visible throughout our social media platforms for the discerning consumers.
With over 15 years experience in paint correction specifically, we have dealt with virtually every paint issue imaginable and understand what it takes to deliver desired results.
With training in both Showroom Detailing, and Autobody Defect Finishing, we address a wide spectrum of paint defects with confidence. This experience provides us with an extremely deep and diverse understanding of automotive paint, which competition cannot replicate. Our paint correction experts can block sand with grits as low as 600, and polish them back to perfection without burning clearcoat. A dying art form; with our scratch and touch up repair service we can precisely fill, sand, and polish deep scratches and stone chips with expert precision.
Our ceramic coating team can install the most "tacky" coating on the softest clearcoat without any marring, high spots, or trace.
Our paint protection film technicians have been installing PPF since its introduction to the public market in the late 90's, and can create custom templates by hand on classic vehicles where no precuts exist. Cheat products such as adhesion promoters are rarely used on our PPF installations, meaning when the time comes the paint protection film can be removed without compromising the surface. Where some shops are good in paint protection film installations, but lack in the actual defect repair aspect, Toronto Buffing has strengths in all departments. With our PFF installations, we are not only able to protect your paint from damage, but actually repair past damage prior to installation.
Jargon aside, you will not find DIY style detailing here.
You will not find unskilled labourers here.
You will not find low quality products here.
We take our craft very seriously.
At Toronto Buffing Inc. we understand that we may not be for everyone, and we don't accept every job that comes our way. Our approach may be interpreted as overwhelming, and excessive by some. We have the strong conviction that what we do here is special, and unique. In a world where businesses cut corners, cheap out on materials, and spend the bare minimum time on the task, we stand apart. We are geared toward building long lasting relationships with our clients, as well as providing the highest quality paint restoration, and protection services in the GTA. If good isn't good enough, Toronto Buffing is for you. If the bare minimum doesn't fly in your life, then you have found the right place.
Toronto Buffing Inc. excels where other facilities fall short. We accept complicated, intricate, and delicate jobs with open arms. Whether you have a late model Porsche with thin, soft clear coat, or a newly acquired second hand BMW mistreated from it's past ownership, we have the necessary knowledge, and versatile skill set to get either to the same standard. Brand new cars are not exempt; we can unlock another level of depth and clarity after a paint correction and ceramic coating that you would not think possible. There is no one size fits all when it comes to paint restoration and protection in Toronto, and the process must be modified in the way which benefits the finish the most.
We are masters, and regarded as the Toronto authority in automotive paint correction, paint protection film, ceramic coatings, autobody repairs, scratch repair, chip repair, and other restoration / protection services. By being masters at all things paint, are able to offer a truly comprehensive experience under one roof. We take a no-nonsense approach to paint restoration, and protection, with strict, excessive quality control in place.
We push the boundaries of what is possible with automotive paint, and protection. When it comes to Ceramic Coating in Toronto, we have a serious-minded approach. We have spent decades, and thousands of dollars, exploring what products, procedures, and materials are in fact the best for automotive paint, and thus our clients. The number one priorities for us is the longevity, and the quality of our services.
When it comes to ceramic coatings, Toronto Buffing monitors and stress tests first hand in real time the products we offer to the public. We have tested all note worthy coatings available, leaving out the guess work for our clients. Our coating installations have been proven time and time again to meet or exceed their warranty periods. It can be noted that we warranty our coatings in house, and not by third party. With that being said, with the thousands of ceramic coating installations done to date, we have had zero failures. This is due to our stated preparation, quality control, testing, and due-diligence.
When it comes to paint protection film material, we rigorously research and test materials before offering them to the public. We follow the Scientific Method, utilizing primary, secondary, and tertiary research before offering anything to our clients. You will not find no name, or off-shore paint protection film here. Our work with PPF is backed by an in house material, and labor warranty. Our workmanship is guaranteed for a lifetime, and materials are normally warrantied for 10 years on paper.
Our company slogan "Detailers With Integrity" is something we live by. Our goal is to not only leave a lasting positive experience with our clients, but to leave an impact on the automotive industry as a whole. In an economic climate where businesses are cutting corners and misleading clients to win over jobs, we stay true to our creed. Greed and deceit run rampant in the automotive business. And as a long term goal, we aim at restoring faith to clients that automotive businesses with strong morals and integrity, still exist.
We are the original and only detailing company in Toronto specializing exclusively in automotive exterior restoration and protection. You will not find general cleaning services here.
We put your vehicles needs before our own. We have the strong belief that what we do is unique, and special, and the opportunity to share this standard of quality with our clients can never be taken for granted.
Proudly serving Toronto, Vaughan, Woodbridge, Maple, Kleinburg, Aurora, King City, Mississauga, Markham, Brampton, Scarborough, Etobicoke and more with the best reconditioning and protection on the market.
Ceramic coating Toronto, paint protection film Toronto? We have you covered.
We stand behind our work, and your satisfaction is guaranteed.
Social Media:
Quick Links
Experienced Staff
Our skilled team at Toronto Buffing has over 40 years of combined experience and training in the automotive paint restoration / protection field. We are experienced with everything from aggressive watersanding to fine polishing. We have veteran staff in each department, resulting in a finished product that is unmatched. This is a factor that distinguishes our company from others. We offer a skill traded, not general labor at our Vaughan location.
Integrity is Everything
Where other facilities push specific paint correction, ppf, and ceramic coating products in Toronto due to paid promotion, lower material cost, lower labor cost, ease of use, and other biases, Toronto Buffing holds itself to higher ethical standards.
With lower material cost, comes lower quality. Where others are more interested in keeping their margins high, we are more interested in providing quality products that frankly embarrasses the competition.
We are happy to take the hard route, and use materials that can be challenging to work with due to their powerful chemical make up. Simply put, quality chemicals = quality bonds, which results in protection that will last. Some shops will use an inferior, easier to work with product simply because it will save them labor. We will gladly spend the extra time and effort for our clients.
You will not find services such as 1-Stage Polish (a very light polish) on our menu, because this service always results in mediocrity. It is the job of the professional to make appropriate suggestions to the client. After thousands of paint corrections, we know first hand that these 1-stage polishes are ineffective at removing even the most minor swirls. Simply put, many shops push this service to clients as it takes very little time, and is high margin. A 1-stage polish can be done in about 3 hours, where as a 2-Stage takes ~8. Though the remaining defects are technically the responsibility of the shop for playing off the naiveness of the client, the client usually accepts the job as is, with the logic that they saved some money. This is one of the most common scenarios we hear about at our shop, and is the reason why a majority of the paint correction and coatings done here are redos of jobs done at other shops. At Toronto Buffing, we are fearful of mediocrity. We will gladly take a less profitable approach in order to provide an unequivocal service
Our dynamic skill set allows us to provide a service that is unparalleled to most competitors. Our experience in touch up repairs, and chip repairs allows for a resulting paint correction, PPF and ceramic coating service that is unrivalled. Protecting paint is one thing, making it worthy of protection is a whole different story.
We live breath and sleep automotive paint!
Though many "paint correction" services exist, not all are equal. It is a common misconception that a 3-Stage Paint Correction and Ceramic Pro package is the same across all detailing services, but nothing could be further from the truth. The preparation before a ceramic coating is important, and many different factors can change the results. Does the facility use spot lights to assess their paint correction? Are before and after results demonstrated on a regular basis on their social media? What products are used to correct the paint? What ceramic coating product was used? What is the experience of the technician performing the correction? If the cost of a correction and coating service is low, it can be a clear indication of one of two things. The cost of their products may be low, and thus lower quality, and two their labor cost is low which can indicate either their technicians are inexperienced, or less time is being spent on a vehicle.
We have completed thousands of paint restorations over the last decade, and are true masters of our trade.
At our facility, no vehicle leaves with clusters of defect, barring reasonable factors such as low clear coat. During our process, we regularly identify red flags such as repainted panels, previous polishing attempts. We verify our findings with our high end, lab grade paint meter. The lower panels of your vehicle get the same care as the upper panels. A completed full paint correction at our facility can be inspected in all lighting, and be visibly pure. On average, our paint corrections, and ceramic coating process takes 2-3 business days. We are trained to safely use aggressive methods to remove deep defects that other shops may say are not removable, and are able to get a pure finish free of haze, and micro marring, even on the most delicate finishes.
We pride ourselves on serving customers with very high expectations.
Our pricing may not be the most competitive though package deals can be made if multiple services are being done. If you are looking for the best deal in the city, we are unfortunately not the service for you. If you are looking for a shop that will take the time to remove and improve each defect on every square inch of your paint, with the utmost care and precision, we are for you. If you are looking for a team that cares about the work they put out in the city, you have found the right place. We look at every vehicle we complete as a rolling resume of the quality we strive for. Our services take days, not hours, to complete, and dozens of man ours are spent improving, and protecting your vehicle. We unequivocally stand behind our work, and offer no hassle in house warranty.
We sell on service and quality, not on price.
Our straight forward, results oriented approach is apparent on our online presence, including social media. We never "put on airs" by posting edited, exotic cars in poor lighting, as this does not show anything more than photography skills, not detailing. You will not find gimmicky, overproduced content on our pages. Rather, we show the true results, process, and behind the scenes of our work. We demonstrate dated vehicles (as well as high end vehicles), in all their glory, in the direct sunlight. When choosing a facility, the results are the most important! Results of our ceramic coating installations are shown in both natural, and synthetic lighting, allowing for discerning individuals to be critical. Our PPF installation steps are thoroughly documented, from the wash and claybar stage, to the actual act of laying paint protection film.
We have thorough experience with all vehicle makes including Ferrari, Porsche, Lamborghini, Maserati, Rolls-Royce, Land Rover, Aston Martin, Jaguar, Bentley, BMW, Tesla, Mercedes Benz, Volkswagen, Audi, Honda, Acura, Toyota, Lexus, Nissan, Infiniti, Ford, Chevrolet, Chrysler, Fiat and more. We have extensive experience and training with various European, domestic, and Japanese paint systems.
We are trained to deal with the following paint defects: Swirl marks, Fine Scratches, Scuffs, Overspray, Cement on Paint, Road Paint, Keyed Paint, Dull Headlights , Deep Scratches, Fading Paint, Orange Peel, Etching, Urethane Wave, Dust in Clearcoat, Clearcoat Sink, Spider Scratches, Holograms, Bad Buff Jobs, DIY Polish and Ceramic Coatings, Buffer Trails, Dry Paint, Paint Stains, Sanding Scratches, Tar, Vandalism, Tree Sap, Wear & Tear, Ceramic Coating Removal, Failed Ceramic Coating, Paint Chips, Yellow PPF, Peeling PPF, Paint Protection Film Removal and much more!
We are trained to permanently remove your automotive paint defects and imperfections, rather than cover them with hiders. Clients receive a personalized service in which a minimum of 1 full day is spent on a vehicle (full paint correction and ceramic coating) . On average, ~20 man hours are spent on each vehicle at our Vaughan location, with our most popular 3-Stage Paint Correction and Ceramic Pro Silver Package. Only the best, unadulterated products are used.
Trained, educated, certified, and experienced at the showroom level, detailing facility level, and body shop level in automotive paint correction, paint refinishing, paint protection, ceramic coating and paint repair. This diverse background on different pillars of automotive paint allows us to provide a service that is unmatched. What makes Toronto Buffing different from the competition, is the fact that we only offer exterior services. You will not find interior, or general cleaning services in our portfolio.
Rather than being a jack of all trades, we are masters of one; Paint
This time lapse gives our clientele an idea of how much time, effort, and attention to detail is required in our paint corrections. This job totaled 16 hours, not including time for ceramic coating.
Drop the keys, and give us full discretion over your special vehicle's paint. That is what our client with the Toyota Supra above did. The result is a vehicle that is both restored (all original paint), and protected.
This 2001 Toyota Supra received:
Full Vehicle Wetsand (3000 Grit)
3-Stage Paint Correction
Door Jamb Polishing
Full Disassembly + Cleaning
Headlight Restoration
Custom Chip Repair + Touch Ups
Glass Polishing
Isolated Corrosion Repair
Full Vehicle Dent Repair
Full Body Custom Cut Suntek Ultra PPF
Ceramic Pro PPF Coating
Ceramic Pro Window Coating
Ceramic Pro Wheel Coating
Over 120 hours went into this major restoration.
Check out the results we achieved on this beat up 1996 Toyota Camry. Video shows results after wetsanding, paint correction, and a lifetime ceramic coating.
After a brief 3 days at our shop, this 1967 Mazda Cosmos took home Second Place at the prestigious Cobble Beach Concours competition. Contenstants prepare year round to rank in this “Olympics of Detailing” event. We performed our standard 3-Stage Paint Correction, with some disassembly.
Youtube Video:
We specialize in permanently restoring paint to its full potential via the process of buffing and polishing, and protecting your vehicle with products such as ppf and premium ceramic coatings.
Looking for long term protection against chemicals, environment, and light swirl marks? Invest in a premium ceramic coating at Toronto Buffing with only the best, and long lasting products.
Paint protection film or PPF is the ultimate paint protection. Excellent resistance to stone chips, scratches, and the environment. Complete coverage, wrapped edges, and industry leading material is what we guarantee!
From small chips, to heavy collision damage, Toronto Buffing has a solution for every paint related issue! Factory level paint is used, and virtually all repairs are backed with our lifetime warranty.
Wetsanding is performed in order to remove deeper defects, orange peel, dirt in clearcoat, and more. Toronto Buffing specializes in wetsanding, and utilizes this advanced paint correction technique on a daily basis!
We can repair many clearcoat scratches with various autobody methods, without repainting your vehicle!
Have a stone chip? We can use our well guarded process to repair your chips and protect against rust! Note this service is reserved for those receiving one of our primary services (PPF, Ceramic Coating)
Headlights not looking up to par. Our headlight restoration process is fast, effective, and permanent!
Paint correction is the process of removing defects from an automotive finish. This is (usually) done with collective friction via machine polishers and pads, abrasion via aluminum oxide based compounds and/or fine grit sandpapers. Other tools and accessories may be used throughout the process (meters, lighting, etc).
Contrary to popular belief, the mechanism of action is done by removal of a small fraction of clearcoat. Under a microscope, a scratch, or single swirl mark, is in fact a miniature divot, in the automotive clear coat. Contrary to popular belief, we are not removing the scratch itself, but a very small fraction of the clear coat around it.
Though results are glamorous, true paint correction is a labor intensive, messy, and health hazardous process. It involves hours of machine polishing, with abrasive chemicals.
A quality paint correction is extremely important before doing any sort of "LSP" such as ceramic coating, or paint protection film. Paint correction brings out the full potential, and gloss of a finish, and a ceramic coating protects, and enhancing it. We often use and recommend a Ceramic Coating at Toronto Buffing, following paint correction, to replace the small quantity of material removed.
Preparation of an automotive surface is part of the paint correction process, but in itself is not “paint correction”. With modern vehicles, “paint” correction has little to do with the actual “pigmented paint”, but more so the clearcoat. A tech is usually dealing with a “Clearcoat Correction” rather than paint correction, unless a vehicle is basecoat only (eg. lacquer, or single stage).
“Scratches” or “Swirls” are microscopic cavities in an automotive finish. The process as a whole has one goal; to remove as little material as possible, to achieve a “leveled” scratch free surface. When done correctly, the process is perfectly safe.
Taking paint measurements, thoroughly inspecting the surface, and researching the vehicles history are all good precautions to ensure a safe paint correction.
Polishing is the generic term used to described light machining of paint. Buffing is used to describe the cutting or compound stage of a paint correction. The traditional "buff and polish" or "cut and polish" is now known as a 2-Stage Paint Correction.
Paint correction 50/50 results
We use professional grade products. There is no universal system (in our opinion) for all paint types. Some paints react better to certain buffing compounds and machines than others. We use a variation of Menzerna, 3M, Sonax, and Wolfgang polishing compounds. Panels are frequently inspected with an aggressive 50/50 mix of alcohol, to remove potential "hiders". All products contain zero fillers, and are sourced directly from the manufacture to avoid dilution.
We use the latest machines on the market including brands such as Rupes, Flex, and Makita. We have over a dozen machine polishers of varying size in order to work on the most intricate body styles. There is no standard paring of machines that we use. Certain vehicles such as exotics require smaller, more versatile tools, and larger vehicles require machines that tackle larger surface areas.
Also, we use both styles of polishers; rotary and dual action. The rotary polisher is a tool that many novice detailers fear. At Toronto Buffing Inc, we are masters of this tool, which allows us to achieve much greater results than with just the standard, dual action polishers.
This being said, all the finest products and machines mean nothing in the hands of someone that can not use them. We have mastered flawless finishes on every type of paint, and know exactly what combination of products and tools will be required to reach the desired result, as well as the limitations of paint correction.
We are continuously acquiring the latest in machine polishers to ensure maximum quality, and efficiency is possible!
Safety is a major priority with our paint corrections. We often take measurements of a vehicle before we proceed to machine. Alternatively, a trained technician can tell the thickness of clearcoat by eye. It is important not to solely rely on readings from paint meters, as various techniques can be done during a repainting process to yield an end thickness that is within factory range. By eye, and feel, our techs are able to gauge and compare the strength, elasticity, and clarity of the paint, which can give true light to the nature of a finish. Surprises of repainted panels are often discovered during our paint correction and ceramic coating processes, giving you deeper knowledge into the vehicle you own. Top dollar has been spent on various paint meters capable of measuring on most surface types, but these tools are only useful in conjugation with a skilled paint correction tech.
We use a combination of overhead LED (focused) lighting , paired with several high output standalone LED lights. We also utilize several Scangrip battery operated lights for more illusive areas. We use various spectrums of lighting as well to ensure defects are rectified. We place great emphasis on not only correcting upper sections that you will see, but also lower sections you may only notice as the sun is setting. Every job we do must pass the biggest test of all, the sun!
To remove all possible defects from a vehicle, several factors come into play such as paint condition, type, defects, surface area, vehicle geometry, etc. In order to get an accurate time frame for paint correction, vehicles must be assessed in person. Speaking very generally, paint correction can take a minimum of 8 hours , all the way up to 100 hours for larger, heavily defect, and complex jobs (watersanding jobs).
A question we often get asked, is the one above. The reality is, our process does remove a small percentage of your clear coat. However, the amount is often minuscule, ranging from 1-5 percent for a regular paint correction. When done correctly, a paint correction can be done many times during the life of a vehicle. All precautions are taken during the process, such as measuring paint, to ensure the process is being done safely. We will never remove an excessive amount of clear coat, and will make such executive decisions during the correction process. Due to the fact that we are removing a small percentage of clear coat, we often recommend applying a permanent ceramic coating afterwards to compensate for the minor amount of material removed, while adding many benefits outlined below!
Ceramic coatings are traditionally composed of Silica (also known as SiO2, or Silicon Dioxide ), and chemical solvents. The quality of the silicon dioxide, as well as the solvents have an incredible impact on the quality of a coating. In relation, the ratio of SiO2 and solvents play a major role in product quality.
An ideal ceramic coating for Toronto climate uses high quality key components, as well as the correct ratios. This is why some "ceramic coatings" are sold online for extremely low prices. They are a ceramic coating only by meeting the criteria of having Si02 and Solvents, but offer little to no protection or longevity.
Conventional waxes do not offer any protection against swirl marks and physical wear on a vehicles paint. In fact, waxes have been used for decades to hide paint issues. Ceramic coating service at Toronto Buffing are much different, as they are made from high quality, stable raw materials. A coating can increase the hardness of a surface, resulting in a finish that is more difficult to damage. Ceramic coatings are ideal for those who have a vehicle with a delicate paint finish. What coating is installed is a very important factor. It is important to understand that these ceramic products are not 100 percent scratch proof, but enables a surface to stay defect free for substantially longer than an unprotected surface.
With coatings, it's not only about swirl resistance. Another positive attribute to ceramic coatings is the fact that it adds a sacrificial layer of protection to your paint, that is able to take the brute of the damage, while keeping your original paint intact. These coatings can greatly vary in thickness depending on product and application, but generally can add anywhere from 0.5-2.5 mils. Coatings may get worn and damaged, but at a substantially slower rote. The key concept is that your original paint or clear coat is still protected.
This factor is one of our client's favorite. A coated surface becomes hydrophobic. The science behind this water beading effect has to with the actual contact angle of the coating at a molecular angle. Different coatings have different contact angles, thus a variation in hydrophobic effect. Hydrophobic paints are surfaces that lack the ability to get wet.
Quartz is a sapphire crystal, and most ceramic nano coatings are quartz based. This is what gives a treated vehicle the intense level of gloss. Some coatings even boast the ability to reduce orange peel via layering, such as Ceramic Pro. A key benefit is that a coated surface retains the same level of gloss as the day it was coated, for the duration of the coating.
Gone are the times of spending hours to wash and wax your vehicle. A ceramic coated surface is easier and faster to wash. This is due to some of the previous benefits. First, the hydrophobic properties make it difficult for dirt to adhere to the surface. A thorough rinse is usually enough to get a vast majority of dirt, salt and contamination off the surface. Also, the swirl resistance properties give you more tolerance for wash induced swirl marks, allowing you to worry less when doing a wash on your vehicle. Finally, you can scratch that weekly wax off your to do list, as a coated surface is at its full potential after a regular wash!
Ceramic coatings are long term investment solutions. Your initial investment in one of our coating packages saves you money and time. You will not have to do frequent polishes, or waxes, as you would with an unprotected surface. This can amount to thousands of dollars over the course of your vehicle ownership. Less important than the cash savings, is the time savings. For those who spend their Saturday waxing their vehicle can now use this time enjoying their vehicle!
Want to protect your corrected paint with the best technology available? In Toronto ceramic coating is a must! These nano-ceramic coatings are liquid crystal chemicals that are applied to the surface of a vehicle. They are measurable additional layers, that are flexible and form a covalent bond with a surface. They possess many characteristics and benefits.
Incredibly hydrophobic, they assist with preventing swirl marks by increasing surface hardness, acting as a sacrificial layer to defects, as well as combat the harshness of the environment. We have options ranging from 5 years to 15 years (Lifetime) at our Vaughan location.
You may notice that we do not offer 1 year, and 2 year coatings. Such products do nothing to increase actual hardness of clear coat, nor add a hardened sacrificial layer, and are merely for water beading. It is our strong belief that such products are a disservice to clients, as the protection factor is non existent, and they can enjoy hydrophobic behaviour by applying a spray coating on their own. We have a firm belief of doing things the right way, or not doing them at all!
High end professional ceramic coatings can provide a "glass" like look, because in essence, we are installing a permanent layer of liquid glass on your clear coat!
PPF (paint protection film) is a clear film that’s applied to the surface of your vehicle to protect your paint from rock chips, minor dents, bugs and other road debris keeping your paint unharmed. PPF is a popular choice by customers whom want to preserve their original paint from the inevitabilities of vehicle ownership, such as wear and tear. Commonly used in front end (or other high impact areas) of vehicles where damages mostly occur. We also offer full body PPF packages for ultimate protection and piece of mind. Self healing films are the latest technology in the automotive world. If scratched, the film can be repaired by simply heating the material. The material reflows itself, thus removing the defect.
Audi R8 Bulk Installation PPF Vaughan
Simply put, Suntek offers one of the best paint protection film on the market. They are industry leaders in the PPF market, offering the highest quality, consistent polyurethane materials. The film is extremely durable, and resist stone chips, swirl marks, scratches, chemicals etc. Their latest product Suntek Reaction, is currently the industry leading product, and the go to material of professional installers world wide. While we are aware that many clients request Xpel paint protection, we no longer use such films due to quality issues. We have found that the clarity, quality of glue and poly, and longevity far exceed Xpel.
You have purchased a new vehicle, and are looking for the best protection on the market. Ceramic coatings are wonderful, but do not protect you against stone chips, and deep scratches. You want to be able to enjoy your vehicle without worrying about damaging the aesthetics via wear and tear. Your search is over ; invest in Paint Protection Film!
Suntek has many benefits over traditional materials. They offer a 10 - 12 year standard warranty on their films . Suntek states: Our film also comes with a full 10-year warranty against yellowing, discoloration, peeling, cracking and hazing. If it fails, we’ll replace it—labor included. With a warranty offering like this, it is clear that this company truly stands behind their product!
In the paint protection film industry, there is a wide range with regards to quality of installs. Many veterans in the business will explain, that it is very rare to have a perfect paint protection film installation. There are many factors that contribute to the end result of a ppf installation. These include quality of the paint, condition of the paint, quality of the film, capability of the installer, and environment. We at Toronto Buffing Inc. have the solutions to bring paint up to a move acceptable standard prior to installation; something lacking in alternative service facilities.
Paint protection film has the tendency to amplify certain defects such as stone chips, and micropitting. With the same token, ppf can in fact “flow” certain deeper defects, and reduce their visibility. It is important to understand the limitations of paint protection film. Prior to commencing our work, a blunt conversation about expectations occurs, ensuring there are no surpises.
At Toronto Buffing Inc, we offer several additional services that can bring your paint to a more acceptable, more suitable level for paint protection film installations. Panel refinishing, or repainting, is highly recommended on panels with moderate to severe stone chips. This process reconditions the entire panel, removing all defects.
Our stone chip repair service can assist in further improving a finish prior to PPF installation. Keep in mind, this service is generally limited in scope, as only certain stone chips can be repaired. In certain cases, we are limited in terms of colour match. Certain parameters must be met in order for a chip repair to have a positive result. As mentioned in our chip repair category, improvement, and protection from corrosion is the goal with any chip repair.
Watersanding can improve certain defects that a standard paint correction can not solve. Issues such as orange peel, dust in clearcoat, and previous touch ups are all items that will be amplified by a paint protection film install. Wetsanding can improve these deficiencies prior to install.It is clear that proper preparation is a major factor to a paint protection film installation.
When it comes to PPF Toronto Buffing cuts no corners. All possible edges are wrapped with our installation. What sets us apart is we go beyond the typical precut solution, which is especially useful on rare and unique vehicles.
In house technicians will carefully and precisely disassemble when necessary to ensure your PPF installation is wrapped as much as possible. This process is done with extreme care, and is necessary to reduce the chance of dust contamination.
This film is self healing, using EPT (elastomeric polymer technology) . They are products that are solids, with rubber like properties (elastometers). This means that if any swirls or light-medium scratches are inflicted on the surface, they can heal themselves with either the heat of the sun, warm water, or a heat gun. What this means for the client is that you will not have to replace your film frequently once it gets tarnished. In fact, the rate of deterioration is exponentially reduced with this and other technologies in the film.
Furthermore, another benefit of using Suntek's film is their newest topcoat technology which protects the film. Old school clear bra films yellow, fade, and scar after as little as 1 year of use. This is not the case with Suntek. The film retains its gloss for years with this special clearcoat technology, and protects against environmental contamination. Bugs, tree sap, bird droppings, can be easily removed with a microfiber towel, where as with a normal paint surface, would require thorough decontamination or even polishing!
Another huge benefit to Suntek Ultra PPF is the zero orange peel effect it has. In the past with other materials, customers had to compromise between showing their paints true beauty, and protecting it. The professionals at Suntek have solved this. Traditional films give a slight texture appearance, hindering the gloss and aesthetics of your vehicle. Our install gives you seamless protection; you wont be able to see where the film starts and the paint ends!